IPhone 18 Pro Max could have a thicker camera, leaks indicate

Imagens of what would be a prototype of the iPhone 18 Pro Max began to circulate on social media, bringing details about possible changes to the device’s design. The biggest new feature highlighted is the increase in the thickness of the camera module compared to the iPhone 17 Pro Max. The comparative photos were published by Vadim Yuryev, creator of the Max Tech channel on YouTube.

According to the images released, the general design remains practically the same as the previous model. But there is a notable difference. The camera module is expected to get thicker in the next generation.

Dimensões revealed shows increase of up to 0.85mm

Yuryev has published detailed measurements of the two models side by side. The numbers show small variations, but noticeable to the touch. The base of the iPhone 18 Pro Max’s camera module would be 11.54 mm thick, compared to 11.23 mm on the iPhone 17 Pro Max — a difference of 0.31 mm.

Quando considered the camera protrusion, the difference grows. The new device would reach 13.77 mm in total thickness, compared to the 12.92 mm of the current model. Isso represents an increase of 0.85 mm — enough to be noticed when holding the cell phone.

Essa change is directly linked to one of Apple’s big bets for the 2026 series. Rumors suggest that the iPhone 18 Pro will feature a variable aperture camera, technology that allows you to adjust the amount of light captured, improving the quality of photos in different lighting conditions.

The iPhone 18 Pro will reportedly kick off Apple’s four-part camera upgrade plan:

• Variable aperture
• 1/1.12-inch “ultra-large” main camera sensor
• Enhanced optical image stabilization for ultra-wide lens
• 200-megapixel periscope telephoto lens

Source: Digital Chat… pic.twitter.com/VLJEkgomXY

— Apple Cycle (@theapplecycle) April 26, 2026

Variable Abertura promises better photographic performance

The camera with adjustable aperture is an innovation that brands like Samsung are already exploring on their smartphones. In the case of the iPhone 18 Pro, the functionality should expand the device’s expressive capabilities, allowing more control over depth of field and light sensitivity.

Este feature requires additional components and more physical space inside the device. Therefore, the increase in module thickness is a natural consequence of this technological evolution. Engenheiros and Apple need to accommodate variable opening mechanisms without compromising the overall size of the cell phone.

Leia Também

Seven smartwatches gain prominence with cost-benefit in May 2026

Marathon wins glowing review for Bungie’s level design and gunfights

Xbox glitch allows you to get Dragon Ball FighterZ permanently at no cost

Technology content creators have already tested the iPhone 17 Pro Max and point out that the camera area was already considered quite thick. The additional increase of less than 1 mm may not seem like much in numbers, but in practice, when holding the device, the difference becomes noticeable — especially for those using the phone without a protective case.

Lançamento slated for fall 2026

The iPhone 18 Pro series is expected to be presented in the autumn of the northern hemisphere, the traditional time for new iPhones. Ainda is several months away from the official announcement, but leaks are already beginning to paint a picture of the expected changes.

Além of the camera, other improvements should arrive with the new Pro models. Atualizações processor, improvements in battery life and possible changes to other components are also on the list of speculations. Porém, the comparison images published so far mainly focus on the changes to the external design.

The decision to increase thickness is a classic trade-off in electronics design. On the one hand, it offers improvements in functionality and photographic quality. Do, on the other hand, affects the portability and visual perception of the device — important aspects for consumers who value thinner and lighter designs.

What changes in the iPhone 18 Pro Max:

• Camera Módulo 0.31mm thicker at base
• Saliência camera total 0.85 mm larger than previous model
• Variable Abertura for better lighting control
• Design overall similar to iPhone 17 Pro Max
• Lançamento expected in fall 2026

Apple has not yet confirmed any of these specifications. Tudo what is known for now comes from independent leakers and technology analysts who follow the industry. Fontes company insiders rarely leak information about products in development, so the reliability of this data depends on the track record of the content creators who release it.

Vadim Yuryev, from the Max Tech channel, has built a reputation over the years with accurate predictions about new iPhones. Isso increases the weight of the information it publishes. Ainda thus, until the official announcement, everything should be considered as educated speculation based on prototypes and anonymous sources.

The thickness issue is particularly relevant for the premium smartphone segment. Consumidores who invest in an Pro iPhone expect a product that is portable, elegant and powerful simultaneously. The increase of less than 1 mm in the camera module is a small change, but it marks the evolution trajectory of the Apple flagships towards better photographic performance.