Arval initiative prepares corporate fleets for safe and efficient use of electric cars

The massive transition to electromobility in the corporate sector has brought to light an urgent need for technical retraining for drivers accustomed to combustion models. Diante In this scenario, Arval UK launched new educational material in video format, specifically designed to mitigate the risks associated with the adoption of new technologies and ensure the operational integrity of fleets. The strategy aims to fill the gap in practical knowledge about the fundamental differences between driving a fossil fuel vehicle and a battery-powered model.
The scenario in Reino Unido reflects an accelerated transformation in business mobility, where electric vehicles already represent a significant share of new acquisitions. Recent Levantamentos indicate that more than a third of the orders received by the company in the last year were for purely electric models, increasing the fleet’s electrification rate to levels above 75%, when hybrids are also considered. Essa mudança estrutural exige que gestores de frota e departamentos de recursos humanos priorizem o treinamento, visto que a condução de um elétrico possui particularidades técnicas que, se ignoradas, podem resultar em sinistros ou desgaste prematuro de componentes.
Industry experts point out that the introduction of educational videos and practical guides is a direct response to the need to maintain road safety in a mixed traffic environment. With the forecast that a large part of operational fleets will be made up of zero-emission vehicles by the end of the decade, understanding on-board technologies ceases to be a differentiator and becomes a basic operational requirement. The Arval strategy therefore seeks to level technical knowledge among professional drivers.
Adaptation to instantaneous torque and vehicle weight
One of the most striking features of electric vehicles is the immediate delivery of torque, which provides significantly more vigorous acceleration than that found in equivalent combustion vehicles. Essa Instant engine response can surprise inexperienced drivers and requires smoother modulation of the accelerator pedal to avoid sudden starts. Precise acceleration control is essential not only for passenger comfort, but also for safety on urban roads and highways, where managing distance and reaction time is critical.
The high mass of the trams, mainly due to the battery pack, directly influences braking dynamics and stability in curves. The physics involved in driving a heavier car forces the driver to anticipate stops much further in advance than they would in a diesel or gasoline model. The Arval instructional material highlights the importance of recalibrating the perception of braking distance to ensure the safe immobilization of the vehicle in emergency situations, compensating for the extra weight that the braking system needs to contain.
Power management is also directly linked to tire wear, a maintenance item whose useful life can be reduced in cases of aggressive driving. The immediate transfer of force to the wheels, if not well managed by the driver, results in accelerated degradation of the rubber. Portanto, progressive acceleration education serves a dual role: protecting vehicle integrity and reducing long-term fleet operating costs.
Energy efficiency and regenerative braking
Regenerative braking technology is one of the pillars of efficiency in trams, converting the kinetic energy lost during deceleration into electricity to recharge the battery. Isso introduces the concept of “one-pedal driving”, where releasing pressure on the accelerator starts the braking process. Dominar this technique allows you to extend the vehicle’s autonomy and save the use of conventional mechanical brakes, reducing the need for frequent maintenance of pads and discs.
To maximize the use of this technology and ensure safe operation, drivers must adopt specific practices that differ from traditional driving. The Arval guide suggests a proactive approach, encouraging drivers to experiment with the different levels of regeneration that vehicles offer, adapting the system to road conditions, whether in dense urban traffic or on open roads.
- Constant monitoring of traffic flow to anticipate decelerations without using mechanical brakes.
- Adjust regeneration settings according to terrain topography and road speed.
- Use of the vehicle’s inertia on descents for passive load recovery.
- Smooth transition between accelerating and regenerating to avoid discomfort for occupants.
In addition to the mechanical benefits, the correct application of these techniques contributes to a more fluid and comfortable journey. Reducing sudden shifts between acceleration and braking creates a less stressful cabin environment and improves the overall mobility experience. Para companies, this translates into greater energy efficiency per kilometer driven, optimizing the total cost of ownership of the fleet.
Challenges of pedestrian silence and safety
The absence of the characteristic noise of combustion engines makes electric vehicles extremely quiet, especially at low speeds, which represents a potential risk for inattentive pedestrians and cyclists. In the urban environment, where engine noise often serves as an audible warning of an approaching car, the stealth of trams requires extra attention from drivers. The Arval material warns of the need to constantly check the surroundings, assuming that the pedestrian may not have noticed the presence of the vehicle.
Above 20 km/h, the noise of tires on asphalt begins to be audible, but when parking maneuvers or in residential areas, the risk remains high. Legislações in several countries already require the installation of acoustic vehicle warning systems (AVAS), which emit artificial sounds at low speeds, but excessive reliance on technology should not replace human vigilance. Awareness of this “silent danger” is essential to avoid pedestrian accidents and incidents in areas with large circulation of people.
Drivers are instructed to use their peripheral vision and anticipate movements of pedestrians who may cross the road without looking, based only on hearing. The change in sound paradigm alters the dynamics of interaction between machines and people in cities, requiring a defensive and proactive posture from those behind the wheel. Safety, in this context, depends both on technology and on the driver’s adaptive behavior.
Route planning and charging infrastructure
Range anxiety, or the fear of running out of battery before reaching your destination, is a common concern among new electric vehicle users, but it can be mitigated with proper planning. Diferente from quick refueling at gas stations, electrical recharging requires logistics integrated into the work routine. The video instructs how to use navigation apps that map charging stations, as well as how to consider factors such as stopping time and availability of fast chargers when planning routes.
Climatic factors, such as extreme temperatures, and the intense use of auxiliary systems, such as air conditioning or heating, can impact the actual battery life. Saber How these variables affect the vehicle’s performance is crucial to avoid unforeseen events. The recommendation is to monitor energy consumption in real time, allowing adjustments to driving style if the load is dropping faster than expected for the stretch.
Public and private charging infrastructure has grown, but knowledge about different connector types and charging speeds is vital for operational efficiency. Saber Identifying an ultra-fast charger on a highway or planning an opportunity charge during an overnight stay optimizes driver time and ensures the vehicle is always ready for use. Education about the charging ecosystem removes psychological barriers and facilitates employee acceptance of the technology.






