Samsung tests silicon-carbon batteries of up to 20000 mAh in prototypes

Samsung is testing silicon-carbon batteries with capacities of up to 20,000 mAh for future smartphones, according to leaked internal documents from Samsung SDI released this week. The South Korean company evaluates three main configurations: 12,000 mAh, 18,000 mAh and 20,000 mAh, all based on designs with multiple stacked cells. Esses prototypes seek to significantly increase the autonomy of the devices without compromising too much on the final thickness of the devices.
Testing takes place in the laboratory and involves thermal solutions to dissipate heat generated during intense use and load cycles. Silicon-carbon anode technology allows for higher energy density compared to traditional graphite lithium-ion batteries. Samsung does not yet use this composition in commercial models, but preliminary results indicate potential for future flagships.
Tested prototype configurations
The 12,000 mAh battery uses two cells: a 6,800 mAh cell measuring 4.7 mm thick and a 5,200 mAh cell measuring 3.2 mm thick. With the thermal dissipation layers, the total thickness reaches about 9.3 mm.
Initial results point to autonomy between 20 and 25 hours of screen time when used connected via 4G or Wi-Fi. Esse model demonstrates stability in moderate to high consumption scenarios.
18000 mAh battery in focus
The 18,000 mAh prototype adopts three stacked cells: 6,699 mAh (4.2 mm), 6,000 mAh (3.9 mm) and 5,257 mAh (3.28 mm). The final thickness, including thermal interfaces, reaches approximately 12.3 mm.
This configuration is aimed at robust smartphones or those with prolonged use, such as in professional environments. The Samsung SDI records good performance in initial endurance tests.
The triple design requires extra care with thermal management to avoid accelerated degradation.
Performance of the 20000 mAh model
The 20,000 mAh version showed significant limitations in testing, with failure recorded after just 960 charge cycles.
The smaller models reached 1,500 cycles, which highlights the need for adjustments to cell stacking and intermediate layers.
The company is working on improvements to the power management firmware to increase durability.
Main technical challenges identified
- Volumetric expansion of silicon during load cycles, which compromises structural integrity at high capacities
- Need for optimization in thermal dissipation layers to maintain controlled temperatures
- Stacking adjustments to reduce stress between multiple cells
- Advanced firmware development for load balancing and overload protection
Expected application in future devices
Speculations indicate that isolated 6,800 mAh or 6,699 mAh cells could be integrated into premium models, such as the possible Galaxy S27 Ultra. Silicon-carbon technology offers the path to much greater autonomy in flagships.
Samsung maintains official silence about the leak and continues with iterations to meet security and performance standards required in the market.






